Paint For Fuel, Water, and Storage Tanks

The Longest Lasting Paint For Fuel Tanks, Water Tanks, Storage Tanks, and Clarifiers


Are you looking for the best paint to protect your fuel tanks, water tanks, metal storage tanks, or clarifiers?  Our high-performance industrial paints and coatings provide superior rust and corrosion resistance to significantly extend the life of your assets, even in the harshest environments.  They provide full protection from heat, UV, moisture, acid, and chemical exposure.  They’re excellent choices for oil refineries and wastewater treatment plants / facilities to protect equipment, systems, basins, piping and water clarifiers.

Paint For Storage Tanks - Rust Grip and Enamo Grip
Paint For Diesel Storage Tank


  • Highest level of protection from rust and corrosion for both interior and exterior surfaces.
  • Superior performance for new tank construction or recoating older tanks with no white sandblasting required.
  • Provides excellent abrasion, acid, chemical, and solvent resistance within pH ranges of 1-14.
  • Ceramic heat reflective coatings for keeping tanks and fuel trucks cool while in direct sun or holding heat inside of a tank.
  • Full submersion protection for clarifier tanks and mechanisms, aeration basins, piping systems, and equipment.
  • Sealing, encapsulation, and full protection for concrete and steel structures.
  • Durable abrasion resistant and fade resistant top coats that can be tinted to any exact color.
  • Easy application and maintenance – using brushes, rollers or airless sprayers.
  • Customizable solutions to meet your specific project requirements.

Have Any Questions?  Call Us!
917-836-7816 icon-phone-scs

Best paint for fuel trucks
Paint For Water Clarifier Restoration

Need more information? We look forward to helping you get the best results for your project.

Contact Inquiry Webpage

Rust Grip®

Longest Lasting Encapsulation And Rust Prevention Paint

As a three-coats-in-one corrosion encapsulation system, Rust Grip® acts as a primer, intermediate, and topcoat with a single application.  It strengthens surfaces to 6780 psi (473 bar) when fully cured. (Almost twice as hard as concrete – 3500 psi by comparison).  Rust Grip can be applied directly over rusted metal/steel surfaces or existing paint, with no sandblasting required.  With a 15,000 hour salt spray test rating, Rust Grip® is one of the most effective anti-rust/anti-corrosion coatings.  Especially in heavy salt / salt air (marine) environments.  More…

Moist Metal Grip 

Superior Corrosion Protection For Wet Or Submerged Metal

When surfaces are too wet to apply Rust Grip®, Moist Metal Grip, our water repelling epoxy, can be applied directly to prevent further surface corrosion.  It is ideal for metal exposed to submersion, heavy condensation, or persistent moisture.  Moist Metal Grip is also resistant to chemicals and solvents.  More…

Enamo Grip

Highly Durable Waterproof And UV Resistant Top Coat

A high performance, two-part fully waterproof industrial grade enamel urethane that is a great choice for a high quality top coat.  Enamo Grip has excellent gloss retention and resistant to scuffing, impact, and UV.  It is self leveling and can be tinted to any exact color or finish.  More…

Super Therm®

Ceramic Heat Reflective Paint That Blocks More Than 95% Of Solar Heat

Our Energy Star rated 20 year rated ceramic heat reflective paint designed to block solar heat, heat load, moisture, and air from reaching a surface. It can significantly reduce surface temperatures making it an ideal solution for keeping surfaces cool while in direct overhead sun.  An excellent choice for blocking heat on outdoor tanks and fuel trucks.  More…

Lining Kote UHS

Strongest Protection Against the Harshest Acids, Chemicals, and Solvents

Lining Kote UHS is a two-part pigmented epoxy coating, which will produce a hard, tough coating film. Designed to for use on the interior of tanks, this epoxy coating was built to resist the toughest acid, chemical or solvent environments. Lining Kote UHS has outstanding adhesion and can withstand direct impact. It is resistant to water, humidity and high heat. Lining Kote UHS is made with a high molecular weight base and cure for strength and durability.  More…

Have Any Questions?

Call us at 917-836-7816 for more information about our products or services

Monday - Friday
9:00AM - 5:00PM