Our Coating Solutions
No matter what challenge you may be facing with your project, we can provide an effective solution. Our line of high performance protective industrial paints and coatings can solve some of the toughest problems relating to rust/corrosion control, chemical/acid exposure, insulation, energy savings, high humidity, waterproofing, condensation, and more. For unique or problematic situations, we often recommend a combination of our coatings enhance your results.
All Coating Solutions
- Rust / Corrosion Protection And Encapsulation
- Preventing Deterioration in Harsh Marine Environments
- Underwater Protection
- Chemical And Acid Protection
- Concrete Protection & Sealing
- Energy Savings throughout Industrial, Commercial, & Residential Facilities.
- Blocking Heat Loss or Gain / Heat Reflection
- Insulation of Pipes, Walls, Roofs, and Equipment
- Stopping Condensation
- Preventing the spread of Toxic Mold
- Reducing Costs for Refrigerated Trucks & Facilities
- Fire Proofing & Fire Resistance
- Easy Graffiti Removal Without Blasting & Repainting
Metal Rusting and Corrosion
By using the right coatings to prevent rust and corrosion you can substantially extend the useful life of your assets. In some cases where the integrity of the metal has been compromised, our coatings can actually bond to, and strengthen, rusted or corroded surfaces and prevent further degradation for many years. In addition to protecting metal surfaces, both Rust Grip® and Moist Metal Grip can be applied to concrete, masonry, or wood.
- Rust Grip® – As a three-coats-in-one system, Rust Grip® acts as a primer, intermediate, and topcoat with a single application which strengthens surfaces to 6780 psi (473 bar) after 21 days. (Almost twice as hard as concrete – 3500 psi by comparison). It can be applied directly over rusted surfaces or existing paint, with no sandblasting required in most cases. This substantially cuts costs and the time required to complete a project. More…
- Moist Metal Grip – When surfaces are too wet to apply Rust Grip®, Moist Metal Grip can be applied directly to prevent further surface corrosion. It can be used under water and is resistant to chemicals and solvents. More…
Floor Protection/Top Coats/Acid & Chemical Resistance
Over time, water damage and heavy use can compromise concrete and steel flooring. Extend the useful life of your floorings and postpone expensive replacement costs using coatings that preserve and strengthen steel, concrete, and other surfaces.
- Rust Grip® – As a 1-coat system, Rust Grip® bonds directly to rusted surfaces preventing further corrosion and hardens to 6,870 psi within 21 days. It is a high performance coating for concrete, steel, and other surfaces that are exposed to the harshest environments.
- Enamo Grip – An excellent choice for a durable finish sealer or topcoat that can be applied to a variety of surfaces including high traffic floors. It is fully waterproof and highly resistant to chemicals, staining, and scuffing. Enamo Grip can be tinted to any color. More…
- Lining Kote – If you need dependable protection from the harshest chemical or solvent environments, Lining Kote is a high performance coating designed to withstand direct impact, humidity, and temperatures up to 400° F. Its two part epoxy composition provides flexible protection in PH ranges of 1-10. More…
Asbestos/Hazardous Materials Encapsulation
Safe removal of asbestos or other hazardous materials such as lead-based paint or mold can be exorbitantly expensive in addition to posing significant health risks. Proper encapsulation is a safe and highly cost effective solution for handling the abatement of toxic materials.
- Rust Grip® – Rust Grip® is one of the only coatings on the market patented to safely encapsulate asbestos and lead-based paint (patent #6,695,812) under ASTM E-1795; it can also be used to encapsulate other hazardous materials. After application to a surface, Rust Grip® hardens to 6,800 psi within 21 days. (Concrete is 3,500 psi by comparison). It effectively blocks any contact with air, moisture, or chemicals, and has also been tested as a water barrier under ASTM.
More…
Underwater Protection
Get the high performance underwater coatings that both protect and insulate. From ships/boats to pools to oil rigs, our products can extend the life and protect the value of your assets for years in the harshest/marine environments.
- Moist Metal Grip – Ideal for protecting and strengthening submerged or below grade metal surfaces prone to rust. Moist Metal Grip is a water-repelling epoxy that will absorb into the pores of the metal, seal it, and stop further corrosion. It can be applied directly to wet or condensating rusted metal. More…
- Enamo Grip – A high performance, two-component polyurethane enamel coating that is an excellent choice for a variety of surfaces such as boats/ships above and below the waterline, docks, or submerged pipes. Enamo Grip finishes with a self leveling glossy surface that can be tinted to any color and is fully UV resistant. More…
- Epoxotherm – Designed to insulate wet surfaces, Epoxotherm is a two- part industrial grade epoxy that combines the ceramics of Super Therm® for exceptional insulation performance. It applies directly to wet surfaces, is suitable for full submersion, and is mold/mildew resistant. More…
Concrete Protection
Now you can extend the life, and help preserve the integrity, of concrete walls, floors, and structures. We offer various coatings that condition, strengthen, and protect concrete surfaces.
- Total Seal – Locks on to and seals concrete. Total Seal is highly resistant to hydrostatic pressure and provides superior protection to concrete surfaces against water/submersion, chemicals, and solvents. It can be applied directly to wet/damp surfaces. More…
- SP Interlock – An effective “conditioner” for aged or weathered concrete, SP Interlock penetrates into the pores and works to replace lost solids within a concrete surface. Use an overcoat like Enamo Grip or Rust Grip® to achieve the best results. More…
- Rust Grip® – When rebars in concrete become weakened due to corrosion, Rust Grip® will bond within the pores of the metal to strengthen and protect it from further oxidation and rusting. Rust Grip®, when applied over concrete, is resistant to water and chemicals, and is appropriate for areas with high foot traffic. More…
- Enamo Grip – For a smooth, durable finish that can be tinted to any color, Enamo Grip is a waterproof sealant that is highly resistant to graffiti, chemicals, and staining. It also provides exceptional scuff, mark, and impact resistance. More…
Energy Savings - Insulation and Heat Reduction
Rising energy costs coupled with greater price volatility, can wreak havoc with your bottom line. Energy savings and efficiency has never been more important. Our heat-blocking coatings not only outperform fiberglass insulation, but can easily be applied to more difficult areas such as joints, valves, tight, or wet spaces.
- HSC™ Coating – Specially designed for hot pipes or surfaces. Blocks conductive heat transfer (up to 350° F) and significantly reduces heat loss. HSC™ can also be used as an interior insulation solution for walls or under roofs to enhance or replace existing insulation. More…
- HPC™ Coating – Specially designed to insulate and protect hot pipes or surfaces (such as on a boiler) in situations involving extreme temperatures up to 1,112° F with HPC HT Primer/Coating by effectively blocking conductive heat from leaving the surface. More…
Condensation
Condensation on cold water pipes can cause many problems when traditional insulation or wraps are used. Just a small amount of moisture on the surface can cause corrosion under insulation (CUI) as well as cause mold problems. Our coatings cure directly to the surface, protecting it for years from corrosion, and are highly resistant to mold and mildew.
- Anti-Condensation Thermal Wrap – Our anti-condensation wrap is a unique multi-layered solution for extreme condensation situations. Effectively stops condensation by using a proprietary combination of our most effective ceramic coatings and a high density mold resistant foam insulation buffer. More…
- Super Therm® – Our heat reflective thermal ceramic coating is an excellent choice for a wide range of applications.. More…
- HSC™ Coating – A long term solution that be applied in layers to provide additional protective insulation. HSC™ effectively blocks moisture from reaching the coated surface, protecting it from corrosion for years. More…
Fireproofing/Fire Resistance
- Omega Fire – With Omega Fire, you can build extra safety into structures with a water-based fireproof coating that stays intact above 2000°F and UL and ASTM tested to 3 hours over metal structures. It is non- toxic during and after exposure to fire. More…
Anti-Graffiti and Removal
- Graffiti can be an expensive and time consuming problem that damages and defaces your assets. A coating that is highly resistant to graffiti coupled with the proper cleaning agent is a very cost effective solution.
- Enamo Grip – A two-component polyurethane enamel, Enamo Grip is a uniquely hard and durable coating that is highly graffiti resistant. Enamo Grip will also provideoutstanding resistance to water and humidity, stains, chemicals, and solvents, as well as exceptional scuff, mark, and impact-resistance. More…
- SP Super Cleaner – Designed to work with Enamo Grip but easily removes graffiti from all surfaces. Totally biodegradable and safer than acetone with similar effectiveness.More…
Not sure where to start?
Many of our coatings come in multiple formulations for addressing more complex or special situations. If you’re not sure of the best way to tackle a problem, just contact us. We look forward to helping you find the best solution for your next project.
Have Any Questions?
Call us at 917-836-7816 for more information about our products or services
Monday - Friday
9:00AM - 5:00PM